Auto-Rx Customers Questions & Answers

Visit Auto-Rx® Home Page
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: BASIC AUTO-RX APPLICATION (easy to understand)


Senior Member

Status: Offline
Posts: 267
Date:
BASIC AUTO-RX APPLICATION (easy to understand)
Permalink  
 


Basic Motor Cleaning Application

 

Step 1:             For sump capacity motors of 4 to 6 quarts add the entire contents of one 12 fluid ounce bottle of Auto-Rx into a fresh oil change, with a new filter installed. The use of conventional oil, or a group III mineral oil based oil is necessary.

 

Step 2:             Operate the vehicle under normal driving conditions for 3000 miles. Allow Auto-Rx to safely clean as you drive.

 

Step 3:             Change out the oil and oil filter. Again filling with conventional oil or a mineral oil based group III oil. There is no Auto-Rx added here. Drive the vehicle for 3000 miles. This is the rinse phase. After accumulating the 3000 miles your application is done.

  In vehicle with high mileage, over 100,000, we recommend running a second application.

For heavily sludged motors, we recommend changing the oil filter only at the half way point of driving in step 2. This will prevent the filter from over loading contaminants and operating in the bypass mode. On heavily sludged motors a second application is always needed.

If you are using the product to stop a rotary engine seal leak, it is imperative to run conventional oil or a group III mineral oil to achieve desired results.

 

In severely sludged motors, or in collector cars driven sparingly, we offer a Fast Track application. Please visit the Fast Track application.

 



-- Edited by Frank on Monday 17th of October 2011 11:19:57 AM



-- Edited by Frank on Monday 17th of October 2011 12:26:23 PM

__________________
Frank J. Miller
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us