Auto-Rx Customers Questions & Answers

Visit Auto-Rx® Home Page
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Audi 1.8T, how to Auto RX?


Member

Status: Offline
Posts: 13
Date:
Audi 1.8T, how to Auto RX?
Permalink  
 


I am going to pick up some auto RX for my 02 Audi A4 1.8T. I currently use mobil 1 0W40 and im only a few hundred miles into my oil change so the oil is pretty fresh.

How exactly should I go about doing an auto RX? From what I read, I am ok doing this with mobil 1 since its not a 'true' synthetic, but a really good class 3 oil, correct? The main reason I want to do this is since I do not know the full maintenence history of the car and i've recently purchased it 3 months ago.

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

How many miles does the car have?, as long as the oil you choose is not synthetic or " high milage" you should be ok.

-- Edited by gs300tx at 16:40, 2008-04-16

-- Edited by gs300tx at 16:41, 2008-04-16

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

Its got 78k miles. I use mobil 1 0W40 (VW/Audi approved) which isn't a true synthetic like amsoil, but still a synthetic class 3.

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

You should be ok with Mobile 1, as long it is non synthetic.
Here is a link to a thread in which the user had Mobile and Auto-Rx

http://auto-rx.activeboard.com/forum.spark?forumID=108943&p=3&topicID=16577054

Another link regarding the use of Mobile 1
http://auto-rx.activeboard.com/forum.spark?forumID=108943&p=3&topicID=13285355

here is a quote from that post made my Frank(invnetor of auto rx)

"Auto-Rx can work with synthetic for initial cleaning phase for "Sludge Issues" that includes Mobil 1. It is the sludge problem alone that causes me to state don't use a true synthetic as it's complex additive package holds oil to metal. You don't want this effect when your goal is to remove engine damaging sludge from oil lubricated parts........"

Hope this helps



-- Edited by TurboJim at 11:46, 2008-04-17

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

Alright well I just placed an order for 2 bottles. Hopefully it works well!

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

I would recommend that you NOT use Mobil 1 0w-40 for the cleaning, or rinse phase. As far as I know, and as far as I've seen proved, Mobil 1 0w-40 is a group IV.

__________________
2001 Ford Ranger, 4.0 V6.
Mobil 1 0w-30, Motorcraft FL 820s filter, 3oz Auto Rx


Guru

Status: Offline
Posts: 786
Date:
Permalink  
 

This is my entire post.

Auto-Rx can work with synthetic for initial cleaning phase for "Sludge Issues" that includes Mobil 1. It is the sludge problem alone that causes me to state don't use a true synthetic as it's complex additive package holds oil to metal. You don't want this effect when your goal is to remove engine damaging sludge from oil lubricated parts.

Why not use a group 111 oil for second cleaning & rinsing that will do nicely ?

if synthetic users could understand that sludge keeps being formed and the Auto-Rx Application keeps sludge flowing into the filter and that the end game is to keep there engine from extinction due to sludge. i am sure
group 111 oils would be very acceptable.


ON ENGINE CLEANING APPLICATIONS AUTO-RX CAN WORK WELL WITH ANY SYNTHETIC.


ON TRANSMISSIONS APPLICATIONS AUTO-RX CAN WORK WELL WITH ANY SYNTHETIC.


WHY NOT USE A GROUP !!! OIL OR TRANSMISSION FLUID INSTEAD ? IT IS MORE COST EFFECTIVE AND EQUAL IN PERFORMANCE.


-- Edited by Frank Miller at 18:35, 2008-04-20

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

I stand corrected!

__________________
2001 Ford Ranger, 4.0 V6.
Mobil 1 0w-30, Motorcraft FL 820s filter, 3oz Auto Rx


Guru

Status: Offline
Posts: 786
Date:
Permalink  
 

pwO1 your correct. Sorry my post was so convuluded. i deleted it

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

So i'll be fine using the current mobil 1 during my cleaning phase. I'm going to use regular oil for the rinse. It should be here tomorrow and i'm planning on pouring it in right away.

__________________


Member

Status: Offline
Posts: 9
Date:
Permalink  
 

Mike, you might want to consider for the rinse cycle an oil like Chevron Delo 400 15w-40. I've used it with good results and it's not expensive. You can get in in gallon jugs. If you suspect you have a sludge problem you can do two rinse cycles. If you drain some of your used rinse oil into a glass container you can get an idea of what's coming out of your engine.

If I owned your model car I would be willing to do two complete clean/rinse cycles. Your car is very expensive to work on and the engine really works the oil hard. For me I would do the two complete cycles but would do an extra oil change in the rinse cycle. The rinse cycle is where the real work of getting rid of the crud happens. I would also change the filte with each oil change, even the extra rinse cycle change. You have a great car but a little extra work will be worth the effort.

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

Thanks larry. I ordered 2 bottles of the auto rx and I do plan on doing 2 clean and rinse cycles. I will use my current mobil 1 oil for the first clean phase, then after that for the rinse and next clean/rinse I will use regular oil. I do not want to change out the current mobil 1 in the car because it only has maybe 500 miles on it.

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

How many miles does the car have?

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

78,000

__________________


Guru

Status: Offline
Posts: 786
Date:
Permalink  
 

Do you mean Mobil 1 full synthetic ? if so extend clean mileage to 3000 miles and rinse mileage to 3500 miles.
(I am confused on which Mobil your posting about)


Why are you not doing the maintenance dose ?

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

This is my first time doing an auto-rx. I just got the 2 bottles today. I poured one in and im going to keep it in for 2000-2500 miles then drain and pour in 5w30 castrol gtx for the rinse.

__________________


Senior Member

Status: Offline
Posts: 395
Date:
Permalink  
 

Mike02A4,

Thank you for purchasing Auto-Rx. With 78k miles Why are you not doing the maintenance dose ?

Daryl

__________________


Member

Status: Offline
Posts: 13
Date:
Permalink  
 

I poured the bottle in and i'm doing a clean and rinse. I'm not sure what you are asking? I am doing a clean and rinse on a sludge prone audi/vw 1.8T engine.

__________________


Senior Member

Status: Offline
Posts: 116
Date:
Permalink  
 

With 78,000, I'd do the full clean/rinse deal too

__________________
2001 Ford Ranger, 4.0 V6.
Mobil 1 0w-30, Motorcraft FL 820s filter, 3oz Auto Rx
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us